Underwater Hardware
Packing, Teflon
Teflon Packing material, replaces the older graphite packing. This is used on all American Skie..
$4.95
Packing, GFO / GFU
GFO- or- GFU 1/4" packing material, this is the "Gore + Teflon+ Graphite" Extreme packing seal..
$9.95
Rudder 1 1/8" Post
This is the "Rounded Style" rudder used on many American Skiers and Mastercrafts. This is an America..
$679.95
Rudder Port - 1.125"
Replacement Rudder Port for A/S boats, will fit many other ski boats that use 1 1/8" rudder po..
$349.95
Rudder Port - O-Ring
This is the most common O-Ring found in rudder ports with 1 1/8" rudder posts. YouTube Video Ru..
$0.95
Rudder Port Wear Bushing
Many Ski boats using the SEF rudder ports built in the late 1980's and early 1990's used a rudder po..
$27.95
Rudder Port Wear Bushing - SHORT
Rudder Port Wear Bushing found on SEF 1102 Rudder Ports, this is the Short bushing: ID: 1 1/8"&nb..
$16.95
Setscrew - Stainless 1/4"-28
Small Stainless Steel setscrew used in many struts to keep strut bearings in place and some rudder p..
$2.49
Shaft Log - Aluminum
Aluminum Shaft log, All AmSkiers and many other ski boats fiberglass these shaft logs into the hull ..
$98.95
Shaft Log - Flange Style - Bronze
3 Bolt Bronze Shaft Log, Flange Style with Bronze flange washerDimensions: 1 1/2" ID , 1..
$82.95
Shaft Safety Collar 1"
Stainless Steel Safety Collar for 1" diameter drive shafts, positioned approx. 2" ahead of the stuff..
$39.95
Speedometer Pick Ups
These are the preferred weedmaster style pick-ups that have a molded weed sheding design...
$10.95
Strut - American Skier-1
Strut this is the 1025 Model (different than the 1025-1) used on most A/S Advance models with 1..
$479.95
Strut - American Skier-2
Strut used on some older American Skier boats and others, look for casting number SEF-1025-1 (not th..
$479.95
Strut - American Skier-3
1996+ American Skiers with dorsal fin on strutShaft Diameter : 1 1/8"Angle: 15 deg..
$509.95
Strut Bearing 1 1/8" x 1 3/8"
For 1 1/8" dia. Prop Shafts, Pre-Cut into two 2" long bearings, to be pressed into the front and rea..
$132.95
Strut Bearing 1" x 1 1/4"
For 1" dia. prop shafts, pre-cut into two 2" long bearings, to be pressed in from the..
$89.95
Strut Bearing 1" x 1 1/4" x 4"
1" ID x 1 1/4" OD x 4" long Strut Bearing (AKA Cutlass Bearing) the uncut bearing is found in some o..
$82.95
Strut Bearing Tool
This strut bearing insertion tool makes pressing in strut bearings safe and simple. Never attempt to..
$54.95
Strut Bolts 2 1/4" Long
Stainless Steel Countersunk - Slotted Head Machine screws typically used for underwater hardware lik..
$1.95