∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST ∼ HOURS M - Th 8a - 4p, Fridays 8-12 CST

files/ASU-0115-5.jpg
files/puller-4-995_20pxls.jpg
files/puller_20-3_20995_20pxls.jpg
files/IMG_2856-1000pxls.jpg
files/IMG_2855-1000pxls.jpg

1/7/25 BACK IN STOCK

American Made from Hardened Steel - Heavy Duty Steel Coupling puller, designed for std. 4" and 5" couplings found on most ski boats, can be used for direct drive, or V-drive couplings. Especially useful when removing Vee-drive couplings in tight areas. Supplied with Standard 2" Grade 8 puller push bolt, you supply the connector bolts. On direct drive couplings you can typically use the existing coupling bolts to fasten the tool, on Vee drives you will need longer bolts that vary in length per coupling mfg.

Powder Coated Yellow for easy spotting in the shop, CNC machined, 1/2" thick (1045 steel) shipped with (1) 2" long Grade 8 push bolt.

NEW 9/18/17 Pullers shipped after this date will have (3) different coupling bolt patterns drilled: Std. B/W 4", Std. B/W 5", and now Walters 26 - 3 1/2"

NOTES: When using the puller on the Walters gears with the smaller diameter couplings you will need to thread the transmission mounts to raise the trans end up to allow the puller tool clearance. See insert pics above of using the puller on a Walters Gear using the smaller bolt pattern on the newest generation pullers.

Additional pictures are in a MasterCraft Vee-Drive where the tool is up against the aft end of the fuel tank, our own shop puller, popped this rusty coupler right off. The other 2 pics are of a Walters gear using the new smaller bolt pattern.

Wrench Size Needed: 1 1/8" for base nut & push bolt

Works with the following transmissions:

Name/Model Flange Dia Bolt Circle Holes

Borg-Warner 71 4.00 3.25 4

B-W 72/Hurth 630 5.00 4.25 4

Velvet Drive 5000 5.00 4.25 4

Walters 26 3.50 2.88 8

Walters 36 4.00 3.25 8

ZF25A 4.00 3.25 4

ZF 63A and IV 5.25 4.25 4

ZF-45IV (Ski-Vee) 4.00 3.25 4

For more help or guidance on using this tool check out our YouTube video. https://youtu.be/qjvc7gPfWzA

TRD Coupling Puller Tool

SKU ASU-0115

Regular price: $149.00

1/7/25 BACK IN STOCK

American Made from Hardened Steel - Heavy Duty Steel Coupling puller, designed for std. 4" and 5" couplings found on most ski boats, can be used for direct drive, or V-drive couplings. Especially useful when removing Vee-drive couplings in tight areas. Supplied with Standard 2" Grade 8 puller push bolt, you supply the connector bolts. On direct drive couplings you can typically use the existing coupling bolts to fasten the tool, on Vee drives you will need longer bolts that vary in length per coupling mfg.

Powder Coated Yellow for easy spotting in the shop, CNC machined, 1/2" thick (1045 steel) shipped with (1) 2" long Grade 8 push bolt.

NEW 9/18/17 Pullers shipped after this date will have (3) different coupling bolt patterns drilled: Std. B/W 4", Std. B/W 5", and now Walters 26 - 3 1/2"

NOTES: When using the puller on the Walters gears with the smaller diameter couplings you will need to thread the transmission mounts to raise the trans end up to allow the puller tool clearance. See insert pics above of using the puller on a Walters Gear using the smaller bolt pattern on the newest generation pullers.

Additional pictures are in a MasterCraft Vee-Drive where the tool is up against the aft end of the fuel tank, our own shop puller, popped this rusty coupler right off. The other 2 pics are of a Walters gear using the new smaller bolt pattern.

Wrench Size Needed: 1 1/8" for base nut & push bolt

Works with the following transmissions:

Name/Model Flange Dia Bolt Circle Holes

Borg-Warner 71 4.00 3.25 4

B-W 72/Hurth 630 5.00 4.25 4

Velvet Drive 5000 5.00 4.25 4

Walters 26 3.50 2.88 8

Walters 36 4.00 3.25 8

ZF25A 4.00 3.25 4

ZF 63A and IV 5.25 4.25 4

ZF-45IV (Ski-Vee) 4.00 3.25 4

For more help or guidance on using this tool check out our YouTube video. https://youtu.be/qjvc7gPfWzA

Quantity

Product Description

1/7/25 BACK IN STOCK

American Made from Hardened Steel - Heavy Duty Steel Coupling puller, designed for std. 4" and 5" couplings found on most ski boats, can be used for direct drive, or V-drive couplings. Especially useful when removing Vee-drive couplings in tight areas. Supplied with Standard 2" Grade 8 puller push bolt, you supply the connector bolts. On direct drive couplings you can typically use the existing coupling bolts to fasten the tool, on Vee drives you will need longer bolts that vary in length per coupling mfg.

Powder Coated Yellow for easy spotting in the shop, CNC machined, 1/2" thick (1045 steel) shipped with (1) 2" long Grade 8 push bolt.

NEW 9/18/17 Pullers shipped after this date will have (3) different coupling bolt patterns drilled: Std. B/W 4", Std. B/W 5", and now Walters 26 - 3 1/2"

NOTES: When using the puller on the Walters gears with the smaller diameter couplings you will need to thread the transmission mounts to raise the trans end up to allow the puller tool clearance. See insert pics above of using the puller on a Walters Gear using the smaller bolt pattern on the newest generation pullers.

Additional pictures are in a MasterCraft Vee-Drive where the tool is up against the aft end of the fuel tank, our own shop puller, popped this rusty coupler right off. The other 2 pics are of a Walters gear using the new smaller bolt pattern.

Wrench Size Needed: 1 1/8" for base nut & push bolt

Works with the following transmissions:

Name/Model Flange Dia Bolt Circle Holes

Borg-Warner 71 4.00 3.25 4

B-W 72/Hurth 630 5.00 4.25 4

Velvet Drive 5000 5.00 4.25 4

Walters 26 3.50 2.88 8

Walters 36 4.00 3.25 8

ZF25A 4.00 3.25 4

ZF 63A and IV 5.25 4.25 4

ZF-45IV (Ski-Vee) 4.00 3.25 4

For more help or guidance on using this tool check out our YouTube video. https://youtu.be/qjvc7gPfWzA

Tutorial Videos

For more help or guidance on using this tool check out our YouTube video. https://youtu.be/qjvc7gPfWzA

Customer Reviews

Hi,

I just used the puller I purchased and it worked great!
Thanks, Mike H.

Recently I had the opportunity to use this coupling puller aa++/my boat is a 1989 rampage 28 express with velvet drives this is a fresh water boat but the shafts had not been removed for at least 20 years! my shafts are 1/1/4 inch coupling 4 bolt now this was not easy by any means and if you use the tool you will need to use spacers because the bolts are not long enough but this tool pressed off the couplings on the port motor effortlessly not so much it took much longer but still took the coupling off undamaged without this tool and lots of penetrating oil I could not have been able to reuse everything I took off! tks ron this is a great tool extremely well made! just its ski boat does not mean you cant use it on other boats again thank you ron tanis/john m