∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST ∼ March Hours: Mon - Fri. 8 am to 5 pm CST

Some Mastercrafts and others place the fuel tank too close to the shaft coupling/trans coupling with less than 2" clearance between them. If you cannot get a std. socket and ratchet on your shaft coupling nut and must use an open-end or box end wrench on the shaft coupling nut you will need this shortened coupling.

This is not a coupling but a modification of the std. coupling by ARE and will ship with your ordered shaft assembly

NOTE: The shortened ARE coupling will not allow the ARE separator nut to be used to press the shaft off the coupling.

A.R.E. 5 Inch Reverse Coupling-Shortened

SKU ARE-0090

Regular price: $30.00

Some Mastercrafts and others place the fuel tank too close to the shaft coupling/trans coupling with less than 2" clearance between them. If you cannot get a std. socket and ratchet on your shaft coupling nut and must use an open-end or box end wrench on the shaft coupling nut you will need this shortened coupling.

This is not a coupling but a modification of the std. coupling by ARE and will ship with your ordered shaft assembly

NOTE: The shortened ARE coupling will not allow the ARE separator nut to be used to press the shaft off the coupling.

Quantity

Product Description

Some Mastercrafts and others place the fuel tank too close to the shaft coupling/trans coupling with less than 2" clearance between them. If you cannot get a std. socket and ratchet on your shaft coupling nut and must use an open-end or box end wrench on the shaft coupling nut you will need this shortened coupling.

This is not a coupling but a modification of the std. coupling by ARE and will ship with your ordered shaft assembly

NOTE: The shortened ARE coupling will not allow the ARE separator nut to be used to press the shaft off the coupling.