∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST ∼ May Hours: Mon - Fri. 8 am to 5 pm CST

files/O-_20Ring_20ASU-0011_3ec26209-8c76-4ef4-a807-d85e39aec867.jpg

Special Metric ZF O-Ring:

This is the output shaft o-ring that needs to be replaced anytime the output flange is removed & replaced. You will also need to add a liberal amount of Loctite # 518 Flange Sealant to the splines to prevent trans oil seepage through the splines.

NOTE: a special 4 prong socket must be used to remove or re-attach the nut, the Torque for this nut is 88 Ft. Lbs.

NOTE: Removing the flange with the special socket may require 200+ Ft. Lbs of torque, NEVER use an impact Wrench, apply some heat with a "mini-torch" around the nut to soften the locktite.

ZF Transmission Output Shaft O-Ring

SKU MED-0057

Regular price: $9.95

Special Metric ZF O-Ring:

This is the output shaft o-ring that needs to be replaced anytime the output flange is removed & replaced. You will also need to add a liberal amount of Loctite # 518 Flange Sealant to the splines to prevent trans oil seepage through the splines.

NOTE: a special 4 prong socket must be used to remove or re-attach the nut, the Torque for this nut is 88 Ft. Lbs.

NOTE: Removing the flange with the special socket may require 200+ Ft. Lbs of torque, NEVER use an impact Wrench, apply some heat with a "mini-torch" around the nut to soften the locktite.

Quantity

Product Description

Special Metric ZF O-Ring:

This is the output shaft o-ring that needs to be replaced anytime the output flange is removed & replaced. You will also need to add a liberal amount of Loctite # 518 Flange Sealant to the splines to prevent trans oil seepage through the splines.

NOTE: a special 4 prong socket must be used to remove or re-attach the nut, the Torque for this nut is 88 Ft. Lbs.

NOTE: Removing the flange with the special socket may require 200+ Ft. Lbs of torque, NEVER use an impact Wrench, apply some heat with a "mini-torch" around the nut to soften the locktite.